firewall스크립트
#/etc/rc.d/init.d/firewall
#
# This file sets up the firewall rule
# for topcat.eng.usq.edu.au Beowulf class supercomputer
# version 1.0.0
# 18/08/1998
#
# author : Jacek Radajewski jacek@usq.edu.au
#
# this is our third line of defence
# 1. most of the services are disabled in inetd
# 2. secondly we use tcpd
# 3. we filter packets at the kernel level (this rc script)
#
# the ipfwadm program
IPFWADM="/sbin/ipfwadm"
case "$1" in
start)
echo -n "Inserting firewall rules ... "
export MODE="-i"
# default policies
export IN_POLICY="accept"
export OUT_POLICY="accept"
# if you have machines outside the cluster connected to
# the main system via IP tunnel as described at
# http://www.sci.usq.edu.ay/staff/jacek/topcat then you will
# have to allow forwarding
export FORWARD_POLICY="deny"
;;
stop)
echo -n "Deleting firewall rules ... "
export MODE="-d"
# default policies
export IN_POLICY="accept"
export OUT_POLICY="accept"
export FORWARD_POLICY="accept"
;;
*)
echo "Usage: firewall {start|stop}"
exit 1
esac
# source eth0 configuration
# we assume that eth0 is our interface to the outside world
# most firewall rules will be based on this
. /etc/sysconfig/network-scripts/ifcfg-eth0
# this must be set to the host's IP address
export MYIP=$IPADDR
# we want to allow administrator to telnet in
export ADMINIP=139.x.x.x
#-----------------------------------------------------------------------
# we first set default policies
#-----------------------------------------------------------------------
$IPFWADM -I -p $IN_POLICY
$IPFWADM -O -p $OUT_POLICY
$IPFWADM -F -p $FORWARD_POLICY
#-----------------------------------------------------------------------
# forwarding rules
# deny all TCP and UDP
#-----------------------------------------------------------------------
$IPFWADM -F $MODE deny -S 0.0.0.0/0 -D 0.0.0.0/0 -P tcp
$IPFWADM -F $MODE deny -S 0.0.0.0/0 -D 0.0.0.0/0 -P udp
#-----------------------------------------------------------------------
# We go through the normal services and deny everything we don't need
# from outside.
#-----------------------------------------------------------------------
# ftp
#$IPFWADM -I $MODE deny -D $MYIP/32 ftp -S 0.0.0.0/0 -P tcp
#$IPFWADM -I $MODE accept -D $MYIP/32 ftp -S $ADMINIP/32 -P tcp
# telnet
#$IPFWADM -I $MODE deny -D $MYIP/32 telnet -S 0.0.0.0/0 -P tcp
#$IPFWADM -I $MODE accept -D $MYIP/32 telnet -S $ADMINIP/32 -P tcp
# we block other known services ... well most of them
$IPFWADM -I $MODE deny -D $MYIP/32 echo -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 echo -S 0.0.0.0/0 -P udp
$IPFWADM -I $MODE deny -D $MYIP/32 discard -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 discard -S 0.0.0.0/0 -P udp
$IPFWADM -I $MODE deny -D $MYIP/32 systat -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 daytime -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 daytime -S 0.0.0.0/0 -P udp
$IPFWADM -I $MODE deny -D $MYIP/32 netstat -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 finger -S 0.0.0.0/0 -P tcp
#$IPFWADM -I $MODE deny -D $MYIP/32 http -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 pop -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 pop-3 -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 imap -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 exec -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 login -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 syslog -S 0.0.0.0/0 -P udp
$IPFWADM -I $MODE deny -D $MYIP/32 shell -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 talk -S 0.0.0.0/0 -P udp
$IPFWADM -I $MODE deny -D $MYIP/32 ntalk -S 0.0.0.0/0 -P udp
$IPFWADM -I $MODE deny -D $MYIP/32 cfinger -S 0.0.0.0/0 -P tcp
$IPFWADM -I $MODE deny -D $MYIP/32 nfs -S 0.0.0.0/0 -P udp
# we stop all connections to our X server (if running)
# comment out the line below if you require X access
#$IPFWADM -I $MODE deny -D $MYIP/32 6000 -S 0.0.0.0/0 -P tcp
echo "firewall"
DNS HOWTO의 최신버전은 bind8을 포함하고 있지만 많은 배포본이 bind version 4를 포함하고 있다.